• banner
  • slide1
  • slide2
  • slide3
Our Products Range
Lawas Automotive Lubricants
Engine Oil
Automotive Gear Oils
Transmission Oils
Greases
Lawas Industrial Lubricants
Turbine Oil
Circulating & Hydraulic Oils
Grear Oils
Compressors Oils
Machine Toolway Oils
Spindle Oils
Steam Cylinder Oils
Speciality Lubricants
Soluble Cutting Oils
Semi Synthetic Cutting Oils
Synthetic Cutting Oils
Neat Cutting Oils
Honing oils
Broaching Oils
Rust Preventive Oils
Quenching Oils
Thermic Fluids
Rubber Process Oils
Metal, Wire & Tube Drawing Lubricants
Electro-Stamping Oil
Transformer Oil
Glass Mould Oil
vacuum Pump Oils
Open gear Oil
Suger Mill roll Bearing oils
Industrial Greases
 

Lawas Industrial Lubricants

 

Turbine Oil

 
A)Lawas Turbolube - 32/46/68: These turbine oils are formulated from excellent additives and highly refined selected base stocks. The base oils used are highly paraffinic. Their performance is further promoted by addition of anti-oxidants, rust -inhibitors and anti-foaming agents. These are recommended for lubrication of all types of turbines like steam, gas and hydraulic and can be used in hydraulic systems where long life performance is required.
 

Circulating & Hydraulic Oils

 
A)Lawas GP Lube -32/46/68/100/150/220/320/460: are made from selected high quality, high viscosity Index base stocks & suitable additives. The characteristics and wide range of available viscosities of Law as GP Lube make this product cost-effective general-purpose oil. It's recommended for circulating systems gear boxes, hydraulic system, etc.
 
B)Lawas Hydroline -
15/22/32/46/57/68/81/100/121/150/176/220/257/320/460: a repremium quality anti-wear type of hydraulic oils. The range contains anti-corrosion, anti- oxidation, anti-wear, anti-foam additives specially selected to maintain good air- release properties. This oil are recommended for use in general hydraulic equipment, enclosed gear boxes, vacuum pumps, circulating oiling system & system having vane pump where mild EP properties are required.

C) Lawas Hydroline HLP - 32/46/68/100: Premium hydraulic oils outstanding lubrication characteristic and anti-wear properties, excellentthermal and oxidation stability. These grades specially formulated with highly base oils & carefully selected additives to give outstanding performance. Recommended for hydraulic system having vane type pumps where HIGH LOADED PRESSURE properties are required.
 
D) Lawas Hydroline HVI - 32/46/68/100: is a special purpose hydraulic oil of anti- wear type having very high viscosity index and very low pour point incorporated with special VI improvers, anti-oxidant, anti-wear, anti-rust additives. It is recommended for low operating temperature conditions and it can be safely used for the excavators working under heavy loads is super premium quality hydraulic and lubricating oil having a very high viscosity index and low pour point. This oil is blended with high quality base stocks and fortified with special anti-wear additive, oxidation inhibitors and anti-rust additives. The product is suitable for modern hydraulic systems used in excavators where very low operating temperatures are encountered and application demands very high viscosity index oil. It is recommended for modern hydraulic systems used in excavators, where above conditions prevail. It can be safely used in earthmoving equipment.
 
 

Grear Oils

A) Lawas Mecoma EP - 68/100/150/220/257/320/460/680 are premium quality, general-purpose gear and bearing lubricant. They are lead-free EP lubricants and are protected against foaming; they separate readily from water and are non -corrosive to steel. This gear oils are recommended for heavy loaded gear sets incl uding worm and Industrial hypoid unit's prevention of metal to metal contact and increase the life of gears.
 
 
Compressors Oils
A)Lawas Compress - 32/68/100/150/220 are specially developed for compressors to provide satisfactory lubrication and temperature and load conditions. This oil is blended with selected anti-oxidant and rust inhibitors to give low carbon forming tendencies in air compressors applications. (Air discharge temperature up to 220 degree C.)
 
Machine Toolway Oils
A)Lawas Toolway S- 32/57/68/100/220- These grades have been formulated to impart special frictional characteristics that overcome the stick-slip motion, ordinarily associated with slow moving machine parts. They are also fortified with mild EP and rust preventive properties. These oils are recommended for slide way lubrication of planer, grinder, horizontal boring machines, shapers, jig borers etc. involving high precision works.
 
Spindle Oils
A)Lawas Toolway S- 32/57/68/100/220- These grades have been formulated to impart special frictional characteristics that overcome the stick-slip motion, ordinarily associated with slow moving machine parts. They are also fortified with mild EP and rust preventive properties. These oils are recommended for slide way lubrication of planer, grinder, horizontal boring machines, shapers, jig borers etc. involving high precision works.
 
 
Steam Cylinder Oils
A)Lawas CYL 460/530/680 this oil is recommended for steam engines operating under saturated steam conditions. These oils are widely used in calendar bearings& sugar mills rolls bearings & are also recommended for lubrication of worm gears. This oil has excellent oiliness & film strength properties. This oil resists water washout and minimize deposit formation even at elevated temperatures.
 
Home | Profile | Products | Gallery | Contact Us | Enquiry Designed & Hosted by : MID Promoted by : GID