• banner
  • slide1
  • slide2
  • slide3
Our Products Range
Lawas Automotive Lubricants
Engine Oil
Automotive Gear Oils
Transmission Oils
Greases
Lawas Industrial Lubricants
Turbine Oil
Circulating & Hydraulic Oils
Grear Oils
Compressors Oils
Machine Toolway Oils
Spindle Oils
Steam Cylinder Oils
Speciality Lubricants
Soluble Cutting Oils
Semi Synthetic Cutting Oils
Synthetic Cutting Oils
Neat Cutting Oils
Honing oils
Broaching Oils
Rust Preventive Oils
Quenching Oils
Thermic Fluids
Rubber Process Oils
Metal, Wire & Tube Drawing Lubricants
Electro-Stamping Oil
Transformer Oil
Glass Mould Oil
vacuum Pump Oils
Open gear Oil
Suger Mill roll Bearing oils
Industrial Greases
 

Speciality Lubricants

 
Soluble Cutting Oils

A)Lawas - 400/600: These are soluble oils, form a stable milky white emulsion with water of normal hardness. It contains a rust inhibitor in an emulsified form and anti-oxidant to impart anti-corrosive properties and a biocide to prevent bacterial growth in the emulsion. This oil has superior cooling and lubricating properties, which imparts excellent surface finish and minimizes tool wear. Lawas - 400/600 is normally used in concentration of 3% and above. The oil should be added to the water for stable emulsion. They are recommended for all cutting and grinding Operations where soluble oils are applicable. Lawas - 400/600 meet BIS 1115-
1986 specifications. Lawas - 600 works upto 800ppm Water hardness.

 

Semi Synthetic Cutting Oils

 
A) Lawas Synth S -111: is a semi-synthetic, multi-purpose long life coolant. Itis free from nitrite and is an acceptable in a wide range of operations and water hardness. It can be used on ferrous and non-ferrous metals and is suitable for all general machine operations like grinding, drilling, turning boring, sawing, tapping, and thread cutting. The product offers exceptional stability. And corrosion protections down to quite low concentration.


B) Lawas Synth S 115: is a semi synthetic cutting &grindingfluid specially developed for all type of operations for all metals. It has higher emulsifier a ratio to oil for superb stability. Lawas Synth S 115 utilizes polar lubricants and vegetable oils for better lubricate, especially when machining aluminium.

 

Synthetic Cutting Oils
 
A)Lawas - 400/600: These are soluble oils, form a stable milky white emulsion with water of normal hardness. It contains a rust inhibitor in an emulsified form and anti-oxidant to impart anti-corrosive properties and a biocide to prevent bacterial growth in the emulsion. This oil has superior cooling and lubricating properties, which imparts excellent surface finish and minimizes tool wear. Lawas - 400/600 is normally used in concentration of 3% and above. The oil should be added to the water for stable emulsion. They are recommended for all cutting and grinding Operations where soluble oils are applicable. Lawas - 400/600 meet BIS 1115-
1986 specifications. Lawas - 600 works upto 800ppm Water hardness.
 
Neat Cutting Oils
 
A) Lawas Metacut-14/23/45/55 is neat cutting oil blended from high VI Oils and contains sulphurised fatty material to give better surface finish and longer cutting tools life over a wide range of operation temperature. The oil is recommended for machining operations gear cutting, hobbling, drilling/reaming and thread cutting machines.
 
 
Honing oils
 
A ) Lawas Honmat - 25/30: These products are a blend of specially selected low viscosity mineral oils and additives. They are recommended for honing, drilling, boring and milling operations on high -speed machines.
 
Broaching Oils
 
A ) Lawas Broachmat - 33/44/55: These product containing active sulphur, chlorine and additives. It is suitable for broaching operations. These products ensure excellent heat dissipation and long broach life.
 
Rust Preventive Oils
 
A ) Lawas Broachmat - 33/44/55: These product containing active sulphur, chlorine and additives. It is suitable for broaching operations. These products ensure excellent heat dissipation and long broach life.
 
Quenching Oils
 
A ) Lawas Broachmat - 33/44/55: These product containing active sulphur, chlorine and additives. It is suitable for broaching operations. These products ensure excellent heat dissipation and long broach life.
 
Thermic Fluids
 

A) Lawas Thermic L/M/H: This is a thermic fluid used in indirect from of heating systems in processing industries and is recommended for well designed heat transfer system upto 285 Degree C. This oil has good oxidation and chemical stability, low volatility and it is non-corrosive and non-toxic.


B) Lawas Thermic PLUS: This is premium quality heat transfer oil specifically developed for heat transfer system where bulk Operation tern temperatures go upto 310 Degree C. This product is derived from the finest quality petroleum base stocks and is fortified with high performance additives to enhance performance at higher temperatures. Due to is superior rust preventive properties it inhibits scaling formation thus giving better heattransfer performance for longer life

 
 
Rubber Process Oils
 

A)Lawas Rubrol- 71: This is a dark colour aromatic type mineral oil excellent solvency use in the manufacturer of automobiles tyres, baIting & batter cases etc.


B)Lawas Rubrol- 45: It is a light coloured paraffinic type of oil having excellent colour stability & high flash point good temperature properties recommended for the processing light colours rubber goods.


C)Lawas Rubrol- 41: This is a N aphthenic type of RPO having better solvency properties. It is used for the manufacture of tyres, tubes, mats and footwear etc.

 
 
Metal, Wire & Tube Drawing Lubricants
 

A)Lawas Drawcom - 44 : This product is non-staining, water soluble, cream coloured paste for "dry on" or emulsion applications specially developed for use as an effective coolent in wire drawing operations as Metal Pressing, Stamping, Deep Drawing, Tube Drawing, Forging etc.


B) Lawas Drawcom -15: It is stable, non-staining refined petroleum oil blended with fatty oil improve wetting characteristic. It has good cooling ability and is recommended for us in Aluminum wire drawing operation.


C)Lawas Pressmat R - 100/150/180/220/800:These series are specially developed for the metal forming process which includes operation like Pressing, Stamping, Deep Drawing, Tube Drawing and forging. During these operations considerable amounts of heat and stress are developed. Our stamping oil grades are tailor made to satisfy the various requirements included in metal drawing/forging operation. This oil is highly cost effective, as the rust preventive additive is included. And so there is no need of any extra preventives after the operation for a short period.

 
Electro-Stamping Oil
 
A)Lawas Pressmat R - 20/30: is oil based on mineral hydrocarbons with a high flash point because ofits narrow boiling range. Lawas Pressmat R - 20/30 does not create fumes and this product is skin compatible, non-corrosive and non-toxic. Its recommended for electro-starn pings & laminations of electric motors & pumps.
 
 
Transformer Oil
 
A )Lawas Transformer Oil: Low Viscosity type new insulating oil for Transformers, switchgears and Welding Machine.
 
 
Glass Mould Oil
 
A )Lawas Glass mould - 40: This product is specially developed for glass industries as a mould release agent. We have also low viscosity M. R. oil for use in constructions and cement pipes and cement sheets industries. It can be applied on the mould by spraying or with swab for easy release
 
 
vacuum Pump Oils
 
A ) Lawas Vacuum LV /MV /HV: These products are specially developed for use in vacuum pumps. These products having low vapour pressure even at high temperature. These products have low rate of absorbing water and have high lubricity, which results in obtaining the best performance from vacuum pumps.
 
Open Gear Oil
 
A )Lawas Vacuum LV /MV /HV: These products are specially developed for use in vacuum pumps. These products having low vapour pressure even at high temperature. These products have low rate of absorbing water and have high lubricity, which results in obtaining the best performance from vacuum pumps.
 
Suger Mill Roll Bearing Oils
 
Lawas Sugmi - 40 / 85: are open gear compounds heavy viscous, adhesive type black petroleum products fortified with special tackiness agent which reduces oil consumption. They all have pronounced stringiness and excellent film strength to with stand high preventive properties and have ability to stay in place and provide long lasting protection to ropes and open gears. It specially recommended for lubrication of conventional open gears, cables and wire rope
 
 
Industrial Greases

A) Lawas Lithom EP -0/00/2/3: These are high-grade lithium soap base grease containing extreme pressure additives. They have excellent thermal and mechanical stability, protect from corrosion and oxidation. They are water- resistance having high load carrying capacity. Recommended for auto motives bearings, earth moving equipments, Gear couplings, electric motors and heavy mining machinery.


B) Lawas Grease- HT /HTM: These are non-soap greases having unique properties to give advantages over soap type thickeners. They are extremely stable at high temperature, water resistant, shock load absorbing and not affected by acids and alkalis. Recommended for plain and anti-friction bearings at high temperature under shock loads and lubrication of machine elements.


C) Lawas Petroleum Jelly:
Any other types of high temperature & silicon grease are available as per your requirement.

 
 
 
 
 
 
 
 
 
 
 
Home | Profile | Products | Gallery | Contact Us | Enquiry Designed & Hosted by : MID Promoted by : GID